Terminal
See the logs your PolyCast5 is hiding! Great for debugging or curiosity.
Device Terminal
- Open this page in Google Chrome or Microsoft Edge on a computer (version 89 or later).
- Plug in your PolyCast5 with a USB cable that supports data, and make sure the screen is on.
- Click Connect and choose the port. It usually appears as “USB JTAG/serial debug unit.”
- After connecting, soft reset the device by pressing the home and right buttons at the same time.
Logs stay in your browser. Nothing is uploaded.
This browser can’t talk to USB devices. Open this page in Google Chrome or Microsoft Edge on a desktop or laptop computer. Phones, tablets, Safari and Firefox are not supported.
This window is not allowed to use USB serial ports. Open this page directly in a normal Chrome or Edge tab, not inside the theme editor or another site.
The port is busy. Close anything else using your PolyCast5 (another tab with this page or the Firmware Updater, idf.py monitor, the Arduino IDE), then click Connect again.
Could not open the port. Unplug the device, plug it back in, and click Connect again.
Your PolyCast5 is in download (flashing) mode, so its firmware is not running. Press Home and Right together on the device to restart it.
Your PolyCast5 crashed at . Click Save log and send us the file so we can fix it. Logs can include Wi-Fi network names, so only share them with us. Contact support
